1050 h24 aluminum coil Poland

Design Standard
Based on API 6D and customer requirements
Temperature Range
-150 to 428°F (-101 to 220°C)
Size
NPS 1-36 (DN 25-900)
Pressure Rating
ASME 150 - ASME 2500
End Connections
RF, RTJ as per B16.5 &B16.47 BW, Butt Welded as per B16.25
Contact Now

VALVE DESIGN

1050 h24 Aluminum Coil Poland

1050 h24 aluminum coil Poland is commonly used in the electrical and chemical industries, on account of having high electrical conductivity, corrosion resistance, and workability. Aluminum 1050 alloy is also sometimes used for the manufacture of heat sinks, since it has a higher thermal conductivity than other alloys. In fact, 1050 aluminum coil is a kind of pure industrial aluminum, contain more than 99.50% aluminum component. 1050 aluminum sheet/coil has excellent cold workability, braze-ability and solder-ability, 1050 aluminum sheet/coil has low mechanical strength compared

Features of 1050 h24 Aluminum Coil Poland

1. Excellent Processability. 1050 h24 aluminum coil Poland with excellent processability can perform turning, milling, boring, planing and other mechanical processing at the maximum speed that machine tools can reach, and the forming effect is very good.

2. Extremely High Conductivity and Heat Transfer. The conductivity of 1050 aluminum coil was as high as 62%IACS (20). Furthermore, the thermal conductivity is 231W/(m·℃) at 20 .

3. Other Features. The tensile strength of 1050 h24 aluminum coil Poland is 90 (N/mm2), but it has excellent anodic oxidation effect and high reflectivity.

1050 h24 Aluminum Coil Poland Applications

1050 h24 aluminum coil Poland has high ductility and high reflective finish. Besides, 1050 aluminum coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability and solder-ability, and it is strengthened by cold working. However, 1050 aluminum coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum coil well suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enables our products has a vast application.

Mechanical Properties of 1050 h24 Aluminum Coil Poland

Alloy

Temper

Tensile strength

Elongation

1050

H24

124Mpa

13%

Technical Parameters of 1050 h24 Aluminum Coil Poland

Elements

Si

Fe

Cu

Mn

Mg

Zn

Ti

Al

Content

0.25

0.4

0.05

0.05

0.05

0.07

0.05

Remain

Typical alloy

1050 h24 aluminum coil Poland

Material temper

F, O,H1*,H2*,H3*,H11*,etc.

Thickness

0.14mm-8mm

Width

100mm-1650mm

Length

Customize

Feedback

WhatsApp
+86-15286802751
Email
sale04@mingtai-al.com
Phone
+86-15286802751