English1235 aluminum foil Columbia
- Design Standard
- Based on API 6D and customer requirements
- Temperature Range
- -150 to 428°F (-101 to 220°C)
- Size
- NPS 1-36 (DN 25-900)
- Pressure Rating
- ASME 150 - ASME 2500
- End Connections
- RF, RTJ as per B16.5 &B16.47 BW, Butt Welded as per B16.25
VALVE DESIGN
1235 aluminum foil Columbia contains minimum content of 99.35%. 1235 aluminium foil has excellent rust resistance, formability, dissolving ability, then it is widely used in cigarette packaging, cable, capacitor, tape, battery foil, flexible packaging, etc.
1235 Aluminum Foil Columbia
With a minimum content of 99.35%, 1235 aluminum foil Columbia has become the most common foil alloy on the market today. It’s fairly high aluminum content makes it an excellent alloy for a variety of industrial and food service markets. In the annealed states, it’s very malleable allowing for easy workability and formability. A very similar alloy to 1145 as it contains almost the exact same chemical composition and the same physical attributes. At times, it can be used as a substitute for the 1145 alloy, which is becoming less common in the market today. 1235 aluminium foil is the aluminium foil of aluminium content not less than 99.35%, Haomei Aluminium can process 0.018-0.5mm thickness of 1235 aluminium foil, because this product has excellent rust resistance, formability, dissolving ability, then it is widely used in cigarette packaging, cable, capacitor, tape, battery foil, flexible packaging, etc.
Advantages of 1235 Aluminum Foil Columbia
High plasticity and corrosion resistance
Elevctrical conductivity and thermal conductivity
Gas welding,hydrogen welding and resistance welding
Under various pressure processing and extension,bending
1235 Aluminum Foil Columbia Applications
1.Food Preparation: Aluminum foil is “dual-ovenable” and can be used in both convection and fanassisted ovens. A popular use of 1235 aluminum foil columbia is to cover thinner sections of poultry and meat to prevent overcooking.
2.Insulation: 1235 aluminum foil columbia is 88 percent reflective and is widely used for thermal insulation, heat exchanges and cable liners. Foil-backed building insulation not only reflects heat, also
provides a protective vapor barrier.
Tape
Mechanical Properties of 1235 Aluminum Foil Columbia
Technical Parameters of 1235 Aluminum Foil Columbia
|
Elements |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Al |
|
|
Content |
0.5-0.9 |
0.6-1 |
0.1 |
0.2 |
0.05 |
0.05 |
0.1 |
0.08 |
Remain |
|
|
Typical alloy |
1235 Aluminum Foil Columbia |
|||||||||
|
Material temper |
F, O,H1*,H2*,H3*,H11*,etc. |
|||||||||
|
Thickness |
0.14mm-0.2mm |
|||||||||
|
Width |
100mm-1650mm |
|||||||||
|
Length |
Customize |
|||||||||
