3004 aluminum foil Italy

Design Standard
Based on API 6D and customer requirements
Temperature Range
-150 to 428°F (-101 to 220°C)
Size
NPS 1-36 (DN 25-900)
Pressure Rating
ASME 150 - ASME 2500
End Connections
RF, RTJ as per B16.5 &B16.47 BW, Butt Welded as per B16.25
Contact Now

VALVE DESIGN

3004 aluminum foil Italy has high hardness, good load-bearing and better stamping effect than 3003 aluminium foil. The use of 3004 aluminium foil as lunch box material also has a series of advantages, such as lightweight, good sealing and encapsulation.

3004 Aluminum Foil Italy

3004 aluminum foil Italy has high hardness, good load-bearing and better stamping effect than 3003 aluminium foil. It can be applied to aluminium foil containers and the products are safe and hygienic. On the premise that the thickness of the aluminium foil is enough, gas and water can be completely blocked. In addition, the use of 3004 aluminium foil as lunch box material also has a series of advantages, such as lightweight, good sealing and encapsulation.

Advantages of 3004 Aluminum Foil Italy

1. 3004 aluminum foil raw materials are non-toxic and of good quality. It has the excellent barrier properties of the aluminium foil itself, and strong light-shielding, air-tightness, oxidation resistance, waterproof, moisture-proof, non-toxic and tasteless, etc., meeting food packaging standards. It also has no harmful substances that will be produced after heating.

2. 3004 aluminum foil Italy has strong barrier property, can protect the original taste of food after sealing, and extend the shelf life of food. It can be efficiently recycled and reused to protect the environment and save resources.

3. Excellent Punchability. Because the specific gravity of 3004 aluminum foil is lighter, compared to the products of the same size stamped from other materials, the stamping of 3004 aluminium alloy foil is also lighter, and the cost is effectively reduced while the formability is good.

4 Good Anodic Oxidation. The anodized surface-treated 3004 aluminium foil effectively improves the hardness and abrasion resistance of the aluminium foil and also gives the surface of the 3004 aluminum alloy foil a bright and colourful colour.

3004 Aluminum Foil Italy Applications

Container Lunch Box. 3004 aluminum foil Italy can also be used as a lunch box material. The thickness of commonly used 3004 aluminium foil for container lunch boxes is generally between 0.03mm and 0.20mm. It can well adapt to all kinds of special equipment and moulds for dining boxes, which can be fully automatic cold stamping and finally made into cuboids, bowls and other shapes, effectively expanding the range of market applications.

honeycomb

Mechanical Properties of 3004 Aluminum Foil Italy

Alloy

Tensile Strength

Elongation

3004

176Mpa

14%

Technical Parameters of 3004 Aluminum Foil Italy

Elements

Mg

Fe

Cr

Si

Mn

Cu

Zn

Others

Al

Content

2.2-2.8

0.4

0.15-0.35

0.25

0.1

0.1

0.1

0.15

Remain

Typical alloy

3004 Aluminum Foil Italy

Material temper

O,H1*,H2*,etc.

Thickness

0.14mm-0.2mm

Width

100mm-1650mm

Length

Customize

Feedback

WhatsApp
+86-15237181905
Email
sale04@mingtai-al.com
Phone
+86-15237181905