English3004 aluminium foil in nepal
- Design Standard
- Based on API 6D and customer requirements
- Temperature Range
- -150 to 428°F (-101 to 220°C)
- Size
- NPS 1-36 (DN 25-900)
- Pressure Rating
- ASME 150 - ASME 2500
- End Connections
- RF, RTJ as per B16.5 &B16.47 BW, Butt Welded as per B16.25
VALVE DESIGN
3004 Aluminium Foil in Nepal
3004 aluminium foil in nepal is best food container raw material. In fact, 3004 is an upgrade of 3003 alloy. Besides, due to the addition of alloy Mg on the basis of 3003 alloy, 3004 aluminum foil has better performance. For example, it has higher mechanical properties, processability, formability, corrosion resistance, surface handling and so on. Here, our Mingtai 3004 aluminium foil for food container has obtained FDA food certification, kosher certification and other quality certification. The quality is extremely guaranteed !
Advantages of 3004 Aluminium Foil in Nepal
Formability: due to the addition of the alloy Mg, 3004 aluminium foil in nepal has sufficient strength, as well as good plasticity, formability, etc. Therefore, it becomes perfect material of single cavity food container.
Corrosion resistance: Outstanding corrosion resistance is also notable feature of 3004 aluminum foil in nepal. For example, It can well resist the corrosion of water vapor, acid, etc.
Other performance: In addition, 3004 aluminium foil in nepal also has the characteristics of asepsis, environmental protection, low carbon, safety, high temperature resistance, strong air tightness, high barrier, good shading and so on.
3004 Aluminium Foil in Nepal Application
In practical, 3004 aluminium foil in nepal is perfect food container foil. Due to its higher tensile strength and elongation, it can works well in single cavity lunch box. Meanwhile, 3004 container foil is more economic. In addition, for the 3003 container aluminum foil,It’s more suitable for three-cavity or multi-cavity food containers.
Mechanical Properties of 3004 Aluminium Foil in Nepal
|
Alloy |
Tensile Strength |
Elongation |
|
3004 |
176Mpa |
14% |
Technical Parameters of 3004 Aluminium Foil in Nepal
|
Elements |
Mg |
Fe |
Cr |
Si |
Mn |
Cu |
Zn |
Others |
Al |
|
|
Content |
2.2-2.8 |
0.4 |
0.15-0.35 |
0.25 |
0.1 |
0.1 |
0.1 |
0.15 |
Remain |
|
|
Typical alloy |
3004 Aluminium Foil in Nepal |
|||||||||
|
Material temper |
O,H1*,H2*,etc. |
|||||||||
|
Thickness |
0.14mm-0.2mm |
|||||||||
|
Width |
100mm-1650mm |
|||||||||
|
Length |
Customize |
|||||||||
