3104 aluminum sheet Italy

Design Standard
Based on API 6D and customer requirements
Temperature Range
-150 to 428°F (-101 to 220°C)
Size
NPS 1-36 (DN 25-900)
Pressure Rating
ASME 150 - ASME 2500
End Connections
RF, RTJ as per B16.5 &B16.47 BW, Butt Welded as per B16.25
Contact Now

VALVE DESIGN

3104 aluminum sheet Italy belongs to a series of AL-Mn alloy, it is deformed aluminium alloy, the main state is H111/0/H14/H16/H18/H34. 3104 aluminum  is a deformed aluminum alloy with a tensile strength greater than or equal to 275 MPA, and an elongation rate of up to 20%.

3104 Aluminum Sheet Italy

3104 aluminum sheet Italy belongs to a series of AL-Mn alloy, it is deformed aluminium alloy, the main state is H111/0/H14/H16/H18/H34, the tensile resistance can be controlled more than or equal to 275 MPA, the elongation can reach 20%. 3104 aluminium alloy sheet has good deep drawing performance, suitable for thinning, stretching and lightening to reduce the amount of materials, tank materials should be used in various processes. Strictly, in order to obtain high-quality billets, our company strictly controls all processes from melting and casting to hot rolling, cold rolling and finishing, with emphasis on thickness, shape, surface, mechanical properties and anisotropy, so as to make the products have appropriate strength and formability.

Advantages of 3104 Aluminum Sheet Italy

3104 aluminum sheet Italy is a deformed aluminum alloy with a tensile strength greater than or equal to 275 MPA, and an elongation rate of up to 20%; it has good deep drawing performance and is suitable for thinning and stretching to reduce the amount of material. Each process of tank material requires strict ,

is light weight

is easily and economically recycled

has superior barrier qualities

has good formability

offers a bright finish for decoration.

3104 Aluminum Sheet Italy Applications

3104 aluminum sheet Italy are suitable for both transparent and non-transparent lacquering, and will not bend during curing process. For applications requiring deep drawing, such as long caps, Mingtai aluminium closure sheets show very low earing, greatly reducing scrap rate for our clients.

Aluminum closure sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.

Mechanical Properties of 3104 Aluminum Sheet Italy

Alloy

Tensile strength

Elongation

3104

275 Mpa

20%

Technical Parameters of 3104 Aluminum Sheet Italy


Elements

Si

Fe

Cu

Mn

Mg

Cr

Others

Al

Content

0.50

0.70

0.10

0.9~1.5

0.30

0.10

0.05

Remain

Typical alloy

3104 Aluminum Sheet

Material temper

F, O, H12, H14, H16H18, H19, H22, H24H26, H28, H112, H114

Thickness (mm)

0.1-500

Width (mm)

100-2800

Length (mm)

100-2650

Feedback

WhatsApp
+86-15237181905
Email
sale04@mingtai-al.com
Phone
+86-15237181905