English6061 t651 aluminum sheet turkey
- Design Standard
- Based on API 6D and customer requirements
- Temperature Range
- -150 to 428°F (-101 to 220°C)
- Size
- NPS 1-36 (DN 25-900)
- Pressure Rating
- ASME 150 - ASME 2500
- End Connections
- RF, RTJ as per B16.5 &B16.47 BW, Butt Welded as per B16.25
VALVE DESIGN
6061 t651 Aluminum Sheet Turkey
6061 t651 aluminum sheet turkey refers to t651 tempered 6061 aluminum plate. In addition to 6061-T651, 6061-t6, 6061-t4, 6061-O aluminium sheets also are common. As we know, 6061 aluminum belongs to Al-Mg-Si alloy. Therefore, 6061-t651 alloy has excellent weldability. For example, there is no stress cracking. In addition, It also has higher mechanical properties, stamping, machinability, surface treatment effect and so on.
Features of 6061 t651 Aluminum Sheet Turkey
Weldability: 6061 t651 aluminum sheet turkeyalso is famous for its amazing weldability. For example, It can be well suited for tungsten inert gas welding (TIG) or metal inert gas welding (MIG), etc.
Deep stamping: In addition, 6061 t651 alloy has excellent machinability. It can withstand machining at maximum speeds.
Other features: t651 tempered 6061 aluminum sheet, indicating it has been solution heat treated followed by a minimal stretching to reduce stresses in the material. 6061 sheet was then artificially aged to allow the alloying elements to precipitate out of the material, to give immediate maximum strength.
6061 t651 Aluminum Sheet Turkey Applications
In general, 6061 t651 aluminum sheet turkey is highly versatile and normally used for mold manufacturing, marine, electronic, ornamental, machinery, tooling plate, transportation equipment, bridge railing components, and structural, architectural applications. Besides, it’s useful in welded structural application. In a word, 6061 is the alloy of choice for all-purpose applications.
Mechanical Properties of 6061 t651 Aluminum Sheet Turkey
|
Alloy |
Temper |
Tensile strength |
Yield strength |
Elongation |
|
6061 |
T651 |
310 Mpa |
145 Mpa |
25% |
Technical Parameters of 6061 t651 Aluminum Sheet Turkey
|
Elements |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others |
Al |
|
|
Content |
0.4-0.8 |
0.7 |
0.15-0.4 |
0.15 |
0.8-1.2 |
0.04-0.35 |
0.25 |
0.15 |
0.15 |
Remain |
|
|
Typical alloy |
6061 t651 Aluminum Sheet Turkey |
||||||||||
|
Material temper |
F, O,H1*,H2*,H3*,H11*,etc. |
||||||||||
|
Thickness |
0.2-300mm |
||||||||||
|
Width |
20-2650mm |
||||||||||
|
Length |
Customize |
||||||||||
