5052-O aluminum sheet Bulgaria

Publish Time: Author: Mingtai Aluminum

5052-O aluminum sheet Bulgaria

5052 is the representative product of the 5 series of aluminum-magnesium alloys and one of the most used series at present. The 5052 series has good bending performance under H32 tempering and is not easy to crack, so it can be used as a sheet metal material. At the same time, due to the 2.5% magnesium alloy content, the corrosion resistance, rust resistance and fatigue resistance of this product are higher than other series products. 5052-O aluminum sheet Bulgaria is very commonly used and has many excellent characteristics.

5052-O aluminum sheet Bulgaria

O in 5052-O aluminum sheet Bulgaria

The first 5052 four-digit number represents the alloy of the product. The first number 5 is the alloy series of the product, the aluminum-magnesium alloy series. Introduce its chemical composition. The magnesium element of this product plays an important role, and the content is between 2.2-2.8%. Usually the company takes the middle value in the processing process. That is, the magnesium alloy content is 2.5%, so this series of aluminum sheets can become AlMg2.5 again.

Secondly, O represents the processing temper of the product. O is a fully annealed full soft temper. The 5052-O aluminum sheet has good extension properties and can be used in stretching, spinning and other scenarios.

There is also a commonly used H temper. H can be understood as incomplete annealing and work hardening temper, that is, the product has been annealed, and the hardness is downgraded and suitable for processing and molding. At the same time, in order to avoid the hardness of the product from being too soft, appropriate Work hardening. In addition to the number 32, 32 represents that the product has been stabilized and the hardness is 1/4 hardness.

5052-O aluminum sheet manufacturer

5052-O aluminum sheet Bulgaria and flatness

The flatness of 5052 h32 aluminum sheet is an index that many customers value. If your project is a finished product, the flatness of the raw material is more demanding. 5052-O aluminum sheet Bulgaria is related to flatness. If the thickness of the aluminum strip is less than 2.0mm, the flatness cannot be improved by only using the correcting stick to correct it, and the stretching and bending correction equipment must be used, otherwise the flatness will not meet the requirements. Secondly, the flatness correction of medium-thick aluminum plates is more complicated, and large-scale leveling equipment should be used for multiple times and in multiple directions. If possible, you can introduce a milling machine, and at the same time pay attention to frequently correcting the pressing roller. At present, 5052-O aluminum sheet is widely used in sheet metal processing (such as chassis, cabinets and other products that need to be bent and formed)

5052 aluminum sheet Bulgaria

5052-O aluminum sheet Bulgaria and tempering

O Temper The aluminum sheet that represents this temper is relatively soft, and it brings the lowest strength. However, this tempered aluminum product has a higher elongation rate and is suitable for drawing processing.

H32 is the most commonly used tempering. Under this temper, it can be bent at 90 degrees. Manufacturing industries such as sheet metal parts, chassis cabinets, and lamp manufacturing generally require the use of this tempered material.

Mingtai Aluminum 5052-O aluminum sheet Bulgaria

Our company produces and sells 5052 h32 aluminum sheet, and it has many advantages. The advantages are as follows:

High flatness;

The alloy content implements the national standard;

Good surface finish;

According to user needs, single-sided or double-sided protective film can be applied to the surface, which effectively avoids scratches on the surface of the product;

For some commonly used 5052-O aluminum sheet Bulgaria, we will have stock in stock, such as the commonly used 4 x 8 aluminum sheet. 5052 aluminum sheet is a high-quality hot-rolled aluminum sheet with strong anodizing performance. After oxidation, the result is no water ripples and no color difference. The internal structure and microstructure of the high-quality 5052 aluminum sheet are uniform, which is suitable for anodizing processing.

Recommend Products